Free tool
Flat Pouch and Mylar Bag Dieline Template (3-Side Seal)
A 3-side seal pouch is the simplest bag to lay out: a front and a back panel, sealed on both sides and the bottom, with no gusset. It is the usual format for flat mylar bags, sample sachets and single-serve packs. Enter the finished width and height below to get a true-scale template with seal areas, 3 mm bleed and the safe area for text.
The template is for planning artwork. The final dieline for your exact bag is confirmed with your quote.
What this template shows
- Front and back panels side by side at the finished width and height.
- 10 mm seals on both sides and the bottom of each panel, and a 10 mm top seal, shaded grey.
- 3 mm bleed outside the cut line.
- A safe area 6 mm inside the seals for logos, text and barcodes.
- Optional zipper band, tear notches and a round or euro hang hole. A hang hole makes the top seal 14 mm taller.
The template is true-scale and is for planning artwork. The final dieline for your exact bag is confirmed with your quote. See also: Mylar bag size chart.
Templates for other pouch styles
Flat pouch (3-side seal) dieline questions
What is a 3-side seal pouch?
A flat bag made from a front and a back panel sealed on three edges. The fourth edge is left open for filling and is sealed afterwards. It has no gusset, so it lies flat.
Can I use this for a mylar bag template?
Yes. Most flat mylar bags are 3-side seal pouches. Enter the finished width and height of the bag and add the zipper, tear notch or hang hole it needs.
How much of a flat pouch can I print on?
The whole face prints, including the seals, so run background colour to the bleed. Keep small text, logos and barcodes inside the green safe area, which sits 6 mm inside the seals.
Have your dieline? Get the pouch made
Send the style, size, film and quantities with your artwork or template. Our team replies with pricing and confirms the final dieline for your bag.