Free tool
Coffee Bag Dieline Template
A coffee bag dieline needs one thing other pouch templates do not: the position of the degassing valve, so no artwork sits under it. This template opens on a side gusset bag with the valve switched on. Enter your finished size below, or switch to a flat bottom or stand-up pouch if that is how your coffee is packed.
The template is for planning artwork. The final dieline for your exact bag is confirmed with your quote.
What this template shows
- The degassing valve drawn on the front panel, about a third of the way down, with a note to keep artwork clear of it.
- One strip, left to right: back (left half), gusset, front, gusset, back (right half).
- 10 mm fin seals on the outer edges, a bottom seal and a 10 mm top seal.
- 3 mm bleed outside the cut line and a safe area on the front and back panels.
- Switch the style to flat bottom or stand-up and the valve stays on.
The template is true-scale and is for planning artwork. The final dieline for your exact bag is confirmed with your quote. See also: Custom coffee bags.
Templates for other pouch styles
Coffee bag dieline questions
Where does the valve go on a coffee bag?
On the front panel, in the upper part of the bag above the level of the coffee. The template places it about a third of the way down, below the top seal. The exact position is confirmed with your quote.
Which bag style is best for coffee?
Side gusset bags are the traditional choice, flat bottom pouches stand squarely on a shelf, and stand-up pouches suit smaller packs. The generator makes a template for each.
Can I print over the valve?
No. Leave the valve area clear. The template marks it so logos and text can be placed around it.
Have your dieline? Get the pouch made
Send the style, size, film and quantities with your artwork or template. Our team replies with pricing and confirms the final dieline for your bag.