Free tool
Side Gusset Bag Dieline Template
A side gusset bag is made from one strip of film that wraps around and joins at the back. Laid flat, the dieline reads: half the back, a gusset, the front, a gusset, and the other half of the back. Enter the finished width, height and gusset width below to get that strip at true scale, with the fin seals, 3 mm bleed and the safe area.
The template is for planning artwork. The final dieline for your exact bag is confirmed with your quote.
What this template shows
- One strip, left to right: back (left half), gusset, front, gusset, back (right half).
- 10 mm fin seals on the two outer edges. They meet to form the seal down the centre of the back.
- A bottom seal and a 10 mm top seal, shaded grey.
- A dotted fold down the centre of each gusset, which folds inward.
- 3 mm bleed outside the cut line and a safe area on the front and back panels.
The template is true-scale and is for planning artwork. The final dieline for your exact bag is confirmed with your quote. See also: Every pouch format.
Templates for other pouch styles
Side gusset bag dieline questions
Why is the back panel split in two on the dieline?
The film wraps around the bag and its two edges are sealed together down the centre of the back. On the flat template that seam sits at the outer edges, so each end shows half of the back panel.
What is a fin seal?
A seal made by joining the inside faces of the two film edges so the seam stands out like a fin, then folds flat against the back. Keep artwork that must line up away from it.
How wide should the side gusset be?
The gusset width sets how deep the bag opens. Enter the full gusset width: it folds in half down its centre when the bag is flat.
Have your dieline? Get the pouch made
Send the style, size, film and quantities with your artwork or template. Our team replies with pricing and confirms the final dieline for your bag.