Free tool
Stand-Up Pouch Dieline Template
A stand-up pouch dieline has three parts: a front panel, a back panel and a bottom gusset that folds up inside so the bag stands. Enter your finished width, height and gusset depth below and the template draws all three at true scale, with the seal areas, 3 mm bleed and the safe area for text. Download it as an SVG for Illustrator.
The template is for planning artwork. The final dieline for your exact bag is confirmed with your quote.
What this template shows
- Front and back panels side by side at the finished width and height.
- A separate bottom gusset panel, with the centre fold that tucks up inside the bag.
- A fold line on the front and back at half the gusset depth: the gusset seals below it, so keep text above it.
- 10 mm side seals and a 10 mm top seal, shaded grey.
- 3 mm bleed outside the cut line and a safe area 6 mm inside the seals.
The template is true-scale and is for planning artwork. The final dieline for your exact bag is confirmed with your quote. See also: Stand-up pouch styles.
Templates for other pouch styles
Stand-up pouch dieline questions
What size is the bottom gusset on a stand-up pouch?
The gusset depth is the full width of the base panel when it is opened flat. Half of it folds up behind the front panel and half behind the back, so a 3 inch gusset takes about 1.5 inches from the bottom of each face. The template marks that line so artwork stays above it.
Is a doypack the same as a stand-up pouch?
Yes. Doypack is another name for a stand-up pouch with a bottom gusset. This template covers both.
Where should the zipper sit on a stand-up pouch?
Below the top seal and below the tear notch, so the bag tears open above the zipper and reseals with it. The template draws the zipper band so artwork details stay clear of it.
Have your dieline? Get the pouch made
Send the style, size, film and quantities with your artwork or template. Our team replies with pricing and confirms the final dieline for your bag.